|
|
Product code |
Product |
Quality Specifications |
Product Description |
|
CS03
|
Aluminium Cast Strips
|
Alloy-AA3003,%Si-0.60 max.,%Fe-0.70 max.,%Cu-0.05 to 0.20,%Mn-1.00 to 1.50,%Zn-0.10 max.,%OI each-0.05 max.,%OI total-0.15 max,crown : 0 to 1% (positive crown only). |
AL. CAST STRIP ALLOY AA3003 (CS03)
|
|
CS10
|
Aluminium Cast Strips
|
Alloy-AA1050,% Si-0.25 max.,% Fe-0.40 max.,% Cu-0.05 max.,% Mn-0.05 max.,% Mg- 0.05 max.,% Zn- 0.05 max.,%V- 0.05 max.,% Ti-0.03 max.% OI each- 0.03 max. % Al.-99.50 min, crown : 0 to 1 % (positive crown only).
|
AL. CAST STRIP ALLOY AA1050 (CS10)
|
|
CS11
|
Aluminium Cast Strips
|
Alloy-AA1100,%( Si+ Fe) - 0.95 max.,% Cu-0.05 to 0.20.,% Mn-0.05 max.,% Zn- 0.10 max.,% OI each- 0.05 max., %OI total - 0.15 max., % Al.-99.00 min,crown : 0 to 1 % (positive crown only).
|
AL. CAST STRIP ALLOY AA1100 (CS11)
|
|
CS12
|
Aluminium Cast Strips
|
Alloy-AA1200,%( Si+ Fe) - 1.00 max.,% Cu-0.05 max.,% Mn-0.05 max.,% Zn- 0.10 max.,% Ti-0.05 max.% OI each- 0.05 max., %OI total - 0.15 max. % Al.-99.00 min ,crown : 0 to 1 % (positive crown only).
|
AL. CAST STRIP ALLOY AA1200(CS12)
|
|
CS35
|
Aluminium Cast Strips
|
Alloy-AA1235,%( Si+ Fe) - 0.65 max.,% Cu-0.05 max.,% Mn-0.05 max.,% Mg- 0.05 max.,% Zn- 0.10 max.,%V- 0.05 max.,% Ti-0.06 max.% OI each- 0.03 max., % Al.-99.35 min, crown : 0 to 1 % (positive crown only).
|
AL. CAST STRIP ALLOY AA1235 (CS35)
|
|
CS50
|
Aluminium Cast Strips
|
Alloy-AA5050,% Si - 0.40 max.,% Fe-0.70 max.,% Cu-0.20 max.,% Mn-0.10 max.,% Mg- 1.10 to 1.80,% Cr- 0.10 max.,% Zn- 0.25 max.,% OI each- 0.05 max.,%OI total- 0.15 max., crown : 0 to 1 % (positive crown only).
|
AL. CAST STRIP ALLOY AA5050 (CS50)
|
|
CS52
|
Aluminium Cast Strips
|
Alloy-AA5052,% Si - 0.25 max.,% Fe-0.40 max.,% Cu-0.10 max.,% Mn-0.10 max.,% Mg- 2.20 to 2.80,% Cr- 0.15 to 0.35,% Zn- 0.05 max.,% OI each- 0.05 max.,%OI total- 0.15 max., crown : 0 to 1 % (positive crown only).
|
AL. CAST STRIP ALLOY AA5052 (CS52)
|
|
CS80
|
Aluminium Cast Strips
|
Alloy-AA8011,% Si - 0.50 to 0.90,% Fe-0.60 to 1.00,% Cu-0.10 max.,% Mn-0.20,% Mg- 0.05 max.,% Cr- 0.05 max.,% Zn- 0.10 max.,%Ti-0.08 max.,% OI each- 0.05 max.,%OI total- 0.15 max.,crown : 0 to 1 % (positive crown only).
|
AL. CAST STRIP ALLOY AA8011 (CS80)
|
|
CS86
|
Aluminium Cast Strips
|
Alloy-AA5086,% Si - 0.40 max.,% Fe-0.50 max.,% Cu-0.10 max.,% Mn-0.20 to 0.70,% Mg- 3.50 to 4.50,% Cr- 0.05 to 0.25,% Zn- 0.25 max.,%Ti-0.15 max.,% OI each- 0.05 max.,%OI total- 0.15 max,crown : 0 to 1 % (positive crown only).
|
AL. CAST STRIP ALLOY AA5086 (CS86)
|
|
|
|
|
DIMENSIONS
|
|
1. |
STRIP WIDTH (max)
TOLERANCE ON WIDTH |
1676 mm for Alloy 1000-3000 series expect alloy 3004.
: 1250 mm for Alloy 5000 series
: Difference between max. & min width of strips = +/-4 mm |
|
2. |
STRIP GAUGE NOMINAL
STRIP GAUGE (max)
TOLERANCE ON THICKNESS |
: 6.35 mm
: 10.0 mm for Alloy 1000 series
: 8.0 mm for other Alloys
Throughout the entire coil, longitudinal thickness variation limited to nominal thickness +/- 0.1mm |
|
3. |
CROWN |
: 0 to 1% (Positive crown only) |
|
4. |
COIL OUTER DIA (max) |
: 1900 mm |
|
5. |
COIL INNER DIA (max) |
: 610 mm |
|
6. |
COIL WEIGHT (max) |
: 9 ton |
|
|
LIST OF ABBREVIATIONS |
|
1. |
O.I |
Other Impurities |
15. |
Approx |
Approximate |
|
2. |
DIA |
Diameter |
16. |
BH |
Billet Homogenized |
|
3. |
Max |
Maximum |
17. |
BAN |
Billet Non Homogenized |
|
4. |
Min |
Minimum |
18. |
CG |
Commercial Grade |
|
5. |
Si |
Silicon |
19. |
EC |
Electrical Conductor |
|
6. |
Fe |
Iron |
20. |
HP |
High Purity |
|
7. |
Cu |
Copper |
21. |
IACS |
International Annealed Copper Standard |
|
8 |
Mn |
Manganise |
22. |
Imp |
Impurities |
|
9. |
Mg |
Magnesium |
23. |
LP |
Low Purity |
|
10. |
Cr |
Chromium |
24. |
NI |
Nickel |
|
11. |
Zn |
Zinc |
25. |
Sl. no |
Serial No. |
|
12. |
V |
Vanadium |
|
13. |
Ti |
Titanium |
|
14. |
Al |
Aluminium |
|
|
|
|
|
|
Disclaimer : Data furnished in this page are provisional and likely to vary. |
|
 |
