Regd.Office: NALCO BHAWAN, P/1, Nayapalli,
BHUBANESWAR-751013.

ROLLED PRODUCTS FOR EXPORT

 
SPECIFICATION OF ALUMINIUM ROLLED PRODUCTS (COILS)
Product :

Rolled Product in Sheet form, of General Engineering Quality,produced through the continuous caster route. (Cast Strips having a nominal thickness of about 6.35mm are produced in the continuous casters, which is then rolled down to the desired thickness in the Cold Rolling Mill)

     
Alloy : AA1050, as per chemical composition given below
SPECIFICATIONS  
% Si % Fe % Cu % Mn % Mg % Cr % Zn % V % Ti % Other Impurities Each % Other Impurit-
ies Total 		% Al PRODUCT CODE
0.25 MAX 0.40 MAX 0.05 MAX 0.05 MAX 0.05 MAX - 0.05 MAX 0.05 MAX 0.03 MAX 0.03 MAX - 99.50 MIN RS 10
     
Temper : H12, H14, H16, H18
     
Thickness :

0.40mm to 2.0mm, with a tolerance of +/- 5%
(any thickness desired by the customer within this range can be offered)

     
Width :

1220mm to 1500mm, with a tolerance of +/- 1mm (any width desired by the customer within this range can be offered)

     
Length :

1000mm to 4000mm, with a tolerance of +/- 1mm (any length desired by the customer within this range can be offered)

     
Stack Weight : About 1.5 MT to 2 MT each
     
Packing   Sea worthy packing


SPECIFICATION OF ALUMINIUM ROLLED PRODUCTS (SHEETS)
Product :

Rolled Product in Sheet form, of General Engineering Quality, produced through the continuous caster route. (Cast Strips having a nominal thickness of about 6.35mm are produced in the continuous casters, which is then rolled down to the desired thickness in the Cold Rolling Mill)

     
Alloy : AA1050, as per chemical composition given below
SPECIFICATIONS  
% Si % Fe % Cu % Mn % Mg % Cr % Zn % V % Ti % Other Impurities Each % Other Impurit-
ies Total 		% Al PRODUCT CODE
0.25 MAX 0.40 MAX 0.05 MAX 0.05 MAX 0.05 MAX - 0.05 MAX 0.05 MAX 0.03 MAX 0.03 MAX - 99.50 MIN RS 10
     
Temper : H12, H14, H16, H18
     
Thickness :

0.40mm to 2.0mm, with a tolerance of +/- 5% (any thickness desired by the customer within this range can be offered)

     
Width :

1220mm to 1500mm, with a tolerance of +/- 1mm (any width desired by the customer within this range can be offered)

     
Length :

1000mm to 4000mm, with a tolerance of +/- 1mm (any length desired by the customer within this range can be offered)

     
Stack Weight : About 1.5 MT to 2 MT each
     
Packing   Sea worthy packing
 
URL :Show Tenders