caststrips

.

|| Sow || Billets || Wirerods ||Calcined Alumina||Cast strips||Alumina Chemicals||Alumina Hydrate||

Cast strips

Product code	Product	Quality Specifications	Product Description
CS03	Aluminium Cast Strips	Alloy-AA3003,%Si-0.60 max.,%Fe-0.70 max.,%Cu-0.05 to 0.20,%Mn-1.00 to 1.50,%Zn-0.10 max.,%OI each-0.05 max.,%OI total-0.15 max,crown : 0 to 1% (positive crown only).	AL. CAST STRIP ALLOY AA3003(CS03)
CS10	Aluminium Cast Strips	Alloy-AA1050,% Si-0.25 max.,% Fe-0.40 max.,% Cu-0.05 max.,% Mn-0.05 max.,% Mg- 0.05 max.,% Zn- 0.05 max.,%V- 0.05 max.,% Ti-0.03 max.% OI each- 0.03 max. % Al.-99.50 min, crown : 0 to 1 % (positive crown only).	AL. CAST STRIP ALLOY AA1050(CS10)
CS11	Aluminium Cast Strips	Alloy-AA1100,%( Si+ Fe) - 0.95 max.,% Cu-0.05 to 0.20.,% Mn-0.05 max.,% Zn- 0.10 max.,% OI each- 0.05 max., %OI total - 0.15 max., % Al.-99.00 min,crown : 0 to 1 % (positive crown only).	AL. CAST STRIP ALLOY AA1100(CS11)
CS12	Aluminium Cast Strips	Alloy-AA1200,%( Si+ Fe) - 1.00 max.,% Cu-0.05 max.,% Mn-0.05 max.,% Zn- 0.10 max.,% Ti-0.05 max.% OI each- 0.05 max., %OI total - 0.15 max. % Al.-99.00 min ,crown : 0 to 1 % (positive crown only).	AL. CAST STRIP ALLOY AA1200(CS12)
CS35	Aluminium Cast Strips	Alloy-AA1235,%( Si+ Fe) - 0.65 max.,% Cu-0.05 max.,% Mn-0.05 max.,% Mg- 0.05 max.,% Zn- 0.10 max.,%V- 0.05 max.,% Ti-0.06 max.% OI each- 0.03 max., % Al.-99.35 min, crown : 0 to 1 % (positive crown only).	AL. CAST STRIP ALLOY AA1235(CS35)
CS50	Aluminium Cast Strips	Alloy-AA5050,% Si - 0.40 max.,% Fe-0.70 max.,% Cu-0.20 max.,% Mn-0.10 max.,% Mg- 1.10 to 1.80,% Cr- 0.10 max.,% Zn- 0.25 max.,% OI each- 0.05 max.,%OI total- 0.15 max., crown : 0 to 1 % (positive crown only).	AL. CAST STRIP ALLOY AA5050(CS50)
CS52	Aluminium Cast Strips	Alloy-AA5052,% Si - 0.25 max.,% Fe-0.40 max.,% Cu-0.10 max.,% Mn-0.10 max.,% Mg- 2.20 to 2.80,% Cr- 0.15 to 0.35,% Zn- 0.05 max.,% OI each- 0.05 max.,%OI total- 0.15 max., crown : 0 to 1 % (positive crown only).	AL. CAST STRIP ALLOY AA5052(CS52)
CS80	Aluminium Cast Strips	Alloy-AA8011,% Si - 0.50 to 0.90,% Fe-0.60 to 1.00,% Cu-0.10 max.,% Mn-0.20,% Mg- 0.05 max.,% Cr- 0.05 max.,% Zn- 0.10 max.,%Ti-0.08 max.,% OI each- 0.05 max.,%OI total- 0.15 max.,crown : 0 to 1 % (positive crown only).	AL. CAST STRIP ALLOY AA8011(CS80)
CS86	Aluminium Cast Strips	Alloy-AA5086,% Si - 0.40 max.,% Fe-0.50 max.,% Cu-0.10 max.,% Mn-0.20 to 0.70,% Mg- 3.50 to 4.50,% Cr- 0.05 to 0.25,% Zn- 0.25 max.,%Ti-0.15 max.,% OI each- 0.05 max.,%OI total- 0.15 max,crown : 0 to 1 % (positive crown only).	AL. CAST STRIP ALLOY AA5086(CS86)

DIMENSIONS
1.	STRIP WIDTH (max) TOLERANCE ON WIDTH	1676 mm for Alloy 1000-3000 series expect alloy 3004. : 1250 mm for Alloy 5000 series : Difference between max. & min width of strips = +/-4 mm
2.	STRIP GAUGE NOMINAL STRIP GAUGE (max) TOLERANCE ON THICKNESS	: 6.35 mm : 10.0 mm for Alloy 1000 series : 8.0 mm for other Alloys Throughout the entire coil, longitudinal thickness variation limited to nominal thickness +/- 0.1mm
3.	CROWN	: 0 to 1% (Positive crown only)
4.	COIL OUTER DIA (max)	: 1900 mm
5.	COIL INNER DIA (max)	: 610 mm
6.	COIL WEIGHT (max)	: 9 ton

LIST OF ABBREVIATIONS
1.	O.I	Other Impurities	15.	Approx	Approximate
2.	DIA	Diameter	16.	BH	Billet Homogenized
3.	Max	Maximum	17.	BAN	Billet Non Homogenized
4.	Min	Minimum	18.	CG	Commercial Grade
5.	Si	Silicon	19.	EC	Electrical Conductor
6.	Fe	Iron	20.	HP	High Purity
7.	Cu	Copper	21.	IACS	International Annealed Copper Standard
8	Mn	Manganese	22.	Imp	Impurities
9.	Mg	Magnesium	23.	LP	Low Purity
10.	Cr	Chromium	24.	NI	Nickel
11.	Zn	Zinc	25.	Sl. no	Serial No.
12.	V	Vanadium
13.	Ti	Titanium
14.	Al	Aluminium

Disclaimer : Data furnished in this page are provisional and likely to vary.